EMI digital meters are available for Engine Tachometer, Shaft Tachometer and Rudder Angle indication.  EMI Digital meters feature a bright 3.5 inch TFT color display.  Meter readings are displayed in both large easy to read digital and analog formats for v

DIGITAL METERS

EMI digital meters are available for Engine Tachometer, Shaft Tachometer and Rudder Angle indication.  EMI Digital meters feature a bright 3.5 inch TFT color display.  Meter readings are displayed in both large easy to read digital and analog formats for viewing up to 15 feet away.  Tachometers can be configured for use with input voltage (+/-10V or 0-10V) signals or current signals (4-20ma). In addition to voltage and current signals, Rudder Angle Indicators are configurable for direct connection to rudder feedback potentiometer signals. 

ADDITIONAL FEATURES:

User configurable Forward/Aft facing meter faces available for Shaft Tachometer and Rudder Angle Indicators.

 

Rudder Angle Indicators provide user selectable up or down pointing  needle.

 

Front panel calibration through easy to follow menus.

 

On-console bracket and in-console mounting options are available

 

Front panel dimming controls allow for easy adjustment of

the  display backlight to accommodate any ambient lighting condition. 

 

Night mode displays are provided for additional low level dimming for pilothouse applications.

 

Wide selection of user configurable input ranges available for 

each type of meter application.

 

EMI digital meters are available for Engine Tachometer, Shaft Tachometer and Rudder Angle indication.  EMI Digital meters feature a bright 3.5 inch TFT color display.  Meter readings are displayed in both large easy to read digital and analog formats for v
EMI digital meters are available for Engine Tachometer, Shaft Tachometer and Rudder Angle indication.  EMI Digital meters feature a bright 3.5 inch TFT color display.  Meter readings are displayed in both large easy to read digital and analog formats for v

ENGINE TACHOMETER

PART NO.  

9999-50920-EAXX

SHAFT TACHOMETER

PART NO.

9999-50920-SAXX

RUDDER ANGLE INDICATOR

PART NO.

9999-50920 RAXX

PART NUMBER          CONFIGURABLE RANGES           INPUT SIGNALS     

POWER INPUT REQUIREMENTS - HEATER

DC Model:                                    18-30VDC @4W Typ.

 

 

SIGNAL INPUT

Input Impedance:                         >100K

A/D Converter:                            12-BIT

Measurement Accuracy              <±0.1° TYP.

Input Isolation:                             500V min.

 

 

DISPLAY

Size:                                             70mm x 52mm active area

Pixels:                                          320 x 240

Contrast Ratio:                             700:1

Brightness                                    400 cd/m2

Backlight Type                             LED

Backlight Life                               50,000 Hours Typical

 

ENVIRONMENTAL

Protection Level:                         IP65

Operating Temp:                         0 to 50° C

Storage Temp:                          -10 to 60° C

Small:                                         7.95 lbs / 3.61 kg

 

PROTECTION LEVEL OPTIONS

Front                                            Rear

IP65 - Standard Console              N/A - Cage Clamp Conn.

IP66 - Waterproof                         IP67 - Circular Conn.

  +/- 10VDC, 0-10VDC,

  4-20MA, POT

  (5K TO 10K OHM)

    1200,1899,2100RPM            0-10VDC/4-20MA

    250,350,450,650 RPM          +/-10VDC / 4-20MA

    35, 45, 65 DEGREES                

9999-50920-EAXX

9999-50920-SAXX

9999-50920-RAXX

SPECIFICATIONS 

DIGITAL PROCESS METERS

Our Digital Process Meters share the same features, signal input options and specifications as the digital meters . Process Meters to indicated Voltage, % Level, Temperature or Pressure are available. Custom meter ranges available on request.

 

TEMPERATURE METER

PART NO.  

9999-50920-TAXX

PRESSURE METER

PART NO.

9999-50920-PAXX

LEVEL METER

PART NO.  

9999-50920-LAXX

VOLTAGE METER

PART NO.

9999-50920-VAXX

SPECIFICATIONS 

ADDITIONAL FEATURES:

Our Digital Process Meters share the same features, signal input options and specifications as the digital meters . Process Meters to indicated Voltage, % Level, Temperature or Pressure are available. Custom meter ranges available on request.
Our Digital Process Meters share the same features, signal input options and specifications as the digital meters . Process Meters to indicated Voltage, % Level, Temperature or Pressure are available. Custom meter ranges available on request.
Our Digital Process Meters share the same features, signal input options and specifications as the digital meters . Process Meters to indicated Voltage, % Level, Temperature or Pressure are available. Custom meter ranges available on request.
Our Digital Process Meters share the same features, signal input options and specifications as the digital meters . Process Meters to indicated Voltage, % Level, Temperature or Pressure are available. Custom meter ranges available on request.

POWER INPUT REQUIREMENTS - HEATER

DC Model:                                    18-30VDC @4W Typ.

 

SIGNAL INPUT

Input Impedance:                         >100K

A/D Converter:                            12-BIT

Measurement Accuracy              <±0.1° TYP.

Input Isolation:                             500V min.

 

ENVIRONMENTAL

Protection Level Options:            Front                                       Rear

                                                  IP65 STANDARD               N/A CAGE CLAMP CONN.

                                                  IP66 WATERPROOF         IP67-CIRCULAR CONN.

 

Operating Temp:                         0 to 50° C

Storage Temp:                          -10 to 60° C

  • Front panel calibration through easy to follow menus.

  • On-Console Bracket and In-Console mounting options available

  • Front panel dimming controls allow for easy adjustment of the display backlight to accommodate any ambient lighting condition.

DISPLAY

Size:                                             70mm x 52mm active area

Pixels:                                          320 x 240

Contrast Ratio:                             700:1

Brightness                                    400 cd/m2

Backlight Type                             LED

Backlight Life                               50,000 Hours Typical

    16 TO 32 VDC                   0-10VDC OR 4-20MA

    0 TO 100%                       0-10VDC OR 4-20MA

    0 TO 250 F                       0-10VDC OR 4-20MA

    0 TO 100 PSI                    0-10VDC OR 4-20MA

9999-50920-TAXX

9999-50920-PAXX

9999-50920-LAXX

9999-50920-VAXX

PART NUMBER          CONFIGURABLE RANGES           INPUT SIGNALS     

ANALOG METERS

Analog Rudder Angle Indicator Meters are available in 3” and 5” diameters sizes. Both sizes are 24 Volt backlight illuminated with IP66 rated front face. 5” RAI meters come with a potentiometer interface PCB mounted to back of meter for direct parallel connection to feedback potentiometer. Up to six (6) meters can be wired in parallel with each feedback connection. Multiple rudder angle scales available, special meter scales available upon request.

Analog Rudder Angle Indicator Meters are available in 3” and 5” diameters sizes. Both sizes are 24 Volt backlight illuminated with IP66 rated front face. 5” RAI meters come with a potentiometer interface PCB mounted to back of meter for direct parallel con
Analog Rudder Angle Indicator Meters are available in 3” and 5” diameters sizes. Both sizes are 24 Volt backlight illuminated with IP66 rated front face. 5” RAI meters come with a potentiometer interface PCB mounted to back of meter for direct parallel con
Analog Rudder Angle Indicator Meters are available in 3” and 5” diameters sizes. Both sizes are 24 Volt backlight illuminated with IP66 rated front face. 5” RAI meters come with a potentiometer interface PCB mounted to back of meter for direct parallel con
Analog Rudder Angle Indicator Meters are available in 3” and 5” diameters sizes. Both sizes are 24 Volt backlight illuminated with IP66 rated front face. 5” RAI meters come with a potentiometer interface PCB mounted to back of meter for direct parallel con

ITEM NUMBER

5" RUDDER ANGLE INDICATOR

PART NO.  

9999-46180-WX

5" RUDDER ANGLE INDICATOR FLUSH MOUNT

PART NO.

9999-40890-W

3" RUDDER ANGLE INDICATOR

9999-46600-WXYZ

3" RUDDER ANGLE INDICATOR FLUSH MOUNT

9999-48690-W